Clear Anti Hot Spot REPAIR Tape |
|
|
| |
|
|
Anti Hot Spot Repair Tape is an alternative
to removing old Anti Hot Spot Tape on Polytunnels.
|
|
 |
Depending on the condition of your original foam Anti Hot Spot Tape, you may be able to use the Clear Anti Hot Spot Repair Tape to reseal the old foam tape, to stop it giving of chemical vapour which is harmful to to the polythene. (Although please note it is not a replacement were the foam tape is badly deteriorated or 'slipped'...in areas where this is the case you need to replace the Foam Anti Hot Spot Tape with new.
The Clear Anti Hot Spot Repair Tape has an acrylic glue base and
is made from polypropylene. It is 50mm wide so that it will easily cover
existing 1 inch, 20mm and 30mm wide Anti Hot Spot Tape and will stick to
both the existing polyester clear cover or the exposed PE foam tape.
Clear Anti Hot Spot Repair Tape
50mm Wide
X
50m Long |
£ 4.45
per roll +vat |
|
 -
All Tape Orders are despatched via 1st class post on the day of ordering up until 11.00am
(Carriage via Royal Mail...Weight Based Charge or free carriage when ordered with Polythene) |
|
|
|
